Oat[portrait]

Fleece, layered differently

Conventional fleece jackets are typically polyester on both faces: synthetic against the body, synthetic to the world. ReForm Merino Fleece™ is built as two layers instead, a Merino-blend fleece face for warmth and texture, and a 100% TENCEL™ Lyocell back, so the surface on the body is smooth, breathable cellulose rather than wool or polyester.

Shop ReForm Jackets

Outerwear can be warm to the world and smooth to the skin at once. It is a question of construction, not compromise.

Oat[portrait]

City to open air

The smooth Lyocell back makes the jacket easy to layer, sliding over knits and under coats more easily than coarser, synthetic-first fleece as it moves between city days and open air. Recycled polyester contributes durability within the construction, part of keeping a Merino-faced jacket practical enough for constant wear.

Explore ReForm Fleece

Frequently Asked Questions

ReForm Merino Fleece is a two-layer construction: a Merino-blend fleece face and a 100% TENCEL™ Lyocell back. Unlike conventional polyester fleece, it combines breathable wool at the surface with a smoother plant-derived layer against the body.

It is designed as warm everyday outerwear rather than a technical jacket with a fixed warmth rating. Wear it over a tee in cool weather, beneath a coat when temperatures drop, or alone as the day warms.

The Merino-blend fleece sits on the outer face, while the TENCEL™ Lyocell back feels smoother against the body. Those with a known wool sensitivity may still prefer to test the jacket before extended wear.

Because the two surfaces face different things. The Merino-blend fleece face handles warmth and texture to the world; the 100% TENCEL™ Lyocell back gives the body a smooth, breathable cellulosic surface instead of wool or polyester. It is a construction decision rather than a blend, with each layer chosen for what it touches.

Hand wash or use a gentle machine cycle with cold water and wool detergent. Avoid bleach and wringing, then reshape and lay flat to dry, following the garment care label first.

As with most wool-blend fleeces, repeated friction may cause some surface pilling over time. Treat it as part of normal wear, and avoid rough surfaces to help preserve the finish.

Oat[portrait]

Care Instructions

Close the zip before washing — an open zip is what catches and pulls a fleece face.

Hand wash, or use a gentle machine cycle with cold water, below 30ºC. There's a Merino-blend face on this jacket, so treat it like wool.

Using soap? Keep it mild, wool-specific and enzyme-free. No bleach, no fabric softener.

Never wring it out. Press the water through, then roll the jacket in a dry towel and press again. Dry flat and reshape while damp — don't hang it wet, because a soaked fleece jacket is heavy enough to pull its own shoulders out of shape. No tumble drying or dry cleaning please.

Look after the two sides differently. The fleece face can be brushed gently with a soft clothes brush to lift the pile back up after it's been flattened by a coat or a backpack. The smooth TENCEL™ Lyocell back needs nothing beyond a cool iron if it creases in storage.

Air it after a long day rather than washing it. A jacket like this should see the wash a handful of times a season at most. Hang it somewhere with moving air, brush the face, and it's ready to go again.

Store clean and folded rather than on a hanger — the weight of the fleece will distort the shoulders over a season. Breathable storage, cedar or lavender nearby, and completely dry before it goes away.

As with most wool-blend fleeces, repeated friction may raise some surface pilling, usually where a backpack or seatbelt sits. Take it off with a fabric comb rather than a razor, which can cut the pile.

Oat

Our Materials

Navy[portrait]

Supreme CoolBlend™

Australian Merino wool spun with organic cotton: wool's crimped fibre moves moisture as vapour, cotton adds softness and structure.

Supreme BreezeBlend™

Merino wool paired with eucalyptus-derived TENCEL™ Lyocell, spun in a closed loop that recovers over 99.8% of its solvent.

BioFlex™

Made from 50% recycled corn stalks, our bio-based material uses an innovative process that extracts starch glucose from straw and regenerates it into a nylon fibre.

ReBrew™

Spent coffee grounds are processed into particles carried on recycled polyester filament, then blended with organic cotton to create ReBrew™.
Merlot[portrait]

SilKnit™

Mulberry silk, produced by silkworms fed only mulberry leaves, is knitted with Australian Merino wool to create SilKnit™.

100% Merino

Two grades of Australian Merino: Ultra-Fine at 16.5 microns for next-to-skin tees, Superfine at 18.5 for thermals.

100% Organic Cotton

Organic cotton grown without synthetic pesticides, knitted at 330 to 430 GSM — heavy enough to hold structure through wear.

RegSilk

Silk cocoons regenerated into a protein fibre, spun into the one panel that sits closest to skin: the gusset.

BioTracker™

A hygiene tracker built into the garment, changing colour gradually with wear and washing until a pair is ready to replace.

ReForm™ Merino Fleece

A two-layer construction pairs Merino-blend fleece on the face with 100% TENCEL™ Lyocell against the body.